ADwin-Gold III: Versatile, fast, and precise

ADwin-Gold IIIADwin-Gold III provides you with a powerful compact real-time system.
The performance features of the basic version are:

  • 1 GHz processor clock speed with the T12 processor (XILINX ZYNQ), 1 GB RAM
  • Ethernet interface 1 Gbit/s
  • 16 analog inputs ± 10V, 2×18-bit ADC (MUX 5 µs)
  • 2 analog outputs, each with 16-bit DAC (3 µs)
  • 32 TTL digital channels, usable as inputs or outputs
    4 differential digital channels
  • Input for external event signals
  • Interface for serial LS bus, see HSM-24V module for 24-volt digital signals
  • Can be synchronized with other Gold III devices

The previous models ADwin-Gold II and ADwin-Gold I are still available.

When ordering, you can equip the basic version ADwin-Gold III with numerous additional options.

Ordering options Gold III

Gold III Provides 2 groups with 8 analog inputs each. Conversion is performed via ADC with 18-bit resolution.
With order option F, all channels can be recorded synchronously.

Analog inputs

  • 2 × 8 analog inputs with 18 Bit ADC
  • Capture up to 16 measured values synchronously
  • Conversion rate 1.25 µs for 2 channels, 5 µs for 16 channels
  • Adjustable amplification

Analog inputs

  • 2 × 8 Analog inputs with 18 Bit ADC
  • Channel selection and signal conversion via 2 multiplexers
  • 1 measured value per conversion, 2 × 200 kHz

Analog output values are output via a DAC with 16-bit resolution. You can select the DA4 or DA8 options instead of the basic version.

Analog outputs

  • 4 analog outputs with 16 Bit resolution
  • 200 kHz
  • Conversion time 3 µs

Analog outputs

  • 8 analog outputs with 16 Bit resolution
  • 200 kHz

Analog outputs

  • 2 analog outputs with 16 Bit resolution
  • 200 kHz

All counter options can be combined with each other.
Each counter block in a counter order option contains one 32-bit forward/reverse counter and one PWM (pulse width modulation) counter. The counters in a block can be used independently of each other.

Differential inputs

  • 4 counter blocks, 2 of which can be switched to HTL (High Threshold Logic)
  • differential counter inputs
  • 4 SSI interfaces
  • 12 differential digital inputs (alternative use as counter inputs)

Optical inputs

  • 1 counter block
  • Optical counter inputs
  • 4 transistor outputs
  • 4 optical digital inputs (alternative use as counter inputs)

TTL inputs

  • 2 counter blocks, TTL counter inputs
  • 2 counter blocks, comparator counter inputs
  • 6 PWM outputs
  • 6 TTL digital inputs (alternative use as counter inputs)
  • 6 comparator digital inputs (alternative use as counter inputs)
  • Edge monitoring on digital inputs (input FIFO)
  • Automatic level output on digital outputs (output FIFO)

Choose between CAN high-speed and CAN low-speed. The RSxxx interface has the same functionality in both options.

CAN high-speed

  • 2 CAN interfaces, high-speed
  • 2 Sub-D connectors, 9-pin
  • Specification CAN 2.0 part A+B, ISO 11898
  • CAN identifier 11 bits / 29 bits
  • Bus frequency up to 1 MHz

RSxxx

  • 1 RSxxx interface
  • Operation with RS232 without/with handshake or RS485
  • 5…8 data bits, 1…2 stop bits, parity bit
  • 35 baud…2.3 Mbaud

CAN low-speed

  • 2 CAN interfaces, low speed
  • 2 Sub-D connectors, 9-pin
  • External 12 V power supply required
  • Specification CAN 2.0 part A+B, ISO 11898
  • CAN identifier 11 bits / 29 bits
  • Bus frequency up to 125 kHz

RSxxx

  • 1 RSxxx interface
  • Operation with RS232 without/with handshake or RS485
  • 5…8 data bits, 1…2 stop bits, parity bit
  • 35 baud…2.3 Mbaud

An interface module can be connected to ADwin-Gold III. The interface modules can be exchanged, but cannot be used at the same time.

Profi-SL

  • Plug-in interface module
  • 1 fieldbus node: Profibus slave
  • D-Sub socket, 9-pin
  • Data ranges for inputs and outputs configurable up to 61 double words

Profinet-IO

  • Plug-in interface module
  • 1 fieldbus node: Profinet IO slave
  • Connectors:
    • IRT-CU option: RJ-45 Ethernet connector
    • IRT-FO option: SC-RJ fiber optic duplex connector
  • Data ranges for inputs and outputs configurable up to 1280 bytes

EtherCAT

  • Plug-in interface module
  • 1 fieldbus node: EtherCAT slave
  • 2 RJ-45 Ethernet connectors for input and output
  • Data ranges for inputs and outputs configurable up to 254 bytes

Ethernet/IP

  • Plug-in interface module
  • 1 fieldbus node: Ethernet/IP slave
  • 1 Ethernet RJ-45 connector
  • Data ranges for inputs and outputs configurable up to 254 bytes

With the bootloader, Gold III can automatically execute a program after being switched on. This allows operation without a PC.

Bootloader

  • Starts up to 10 processes after switching on
  • Operates independently of the PC
  • Can store up to 16,000 values in flash memory
ADwin logo

Jäger Compu­ter­gesteue­rte
Mess­technik GmbH
Rheins­traße 2
D-64653 Lorsch

Contact

E-Mail: info@ADwin.de
Phone: +49 6251 9632-0

About Jaeger Messtechnik – Jobs
Events
Contact / Directions
Impressum – Sitemap