ADwin-Gold II: Powerful and precise

The ADwin-Gold II is a powerful compact real-time system. It is the predecessor of the current ADwin-Gold III.
The performance features of the basic version:

  • Processor T11: ADSP TS101Swith mit 300 MHz
  • TiCo processor (TiCo ↔ Timing Controller) for precise timing in the nanosecond range with its own bus for direct access to inputs and outputs
  • Memory: 768 kB internal CPU RAM, 256 MB DRAM
  • High resolution: 2 × 18-bit ADC with 8 analog inputs each via multiplexer
  • FIFO memory at the digital inputs for edge detection with 100 MHz event counter
  • 2 analog outputs, 16 bits, 32 digital I/Os (TTL)
  • Interface for serial LS bus, see HSM-24V module for 24 volt signals
  • Ethernet interface 1 Gbit/s

The following order options are available for ADwin-Gold II:

ADwin-Gold II

Ordering options Gold II

Analog output values are output via a DAC with 16-bit resolution. You can select the DA4 or DA8 options instead of the basic version.

Analog outputs

  • 4 analog outputs with 16-bit resolution
  • 250 kHz

Analog outputs

  • 8 analog outputs with 16-bit resolution
  • 250 kHz

Analog outputs

  • 2 analog outputs with 16-bit resolution
  • 250 kHz

Each counter block in the order option contains one 32-bit forward/reverse counter and one PWM (pulse width modulation) counter. The counters in a block can be used independently of each other.

Option CNT

  • 4 counter blocks
  • 4 SSI interfaces
  • 6 PWM outputs

Choose between CAN high-speed and CAN low-speed. The RSxxx interface has the same functionality in both options.

CAN high-speed

  • 2 CAN interfaces, high-speed
  • 2 Sub-D connectors, 9-pin
  • Specification CAN 2.0 part A+B, ISO 11898
  • CAN identifier 11 bits / 29 bits
  • Bus frequency up to 1 MHz

RSxxx

  • 1 RSxxx interface
  • Operation with RS232 without/with handshake or RS485
  • 5…8 data bits, 1…2 stop bits, parity bit
  • 35 baud…2.3 Mbaud

CAN low-speed

  • 2 CAN interfaces, low speed
  • 2 Sub-D connectors, 9-pin
  • External 12 V power supply required
  • Specification CAN 2.0 part A+B, ISO 11898
  • CAN identifier 11 bits / 29 bits
  • Bus frequency up to 125 kHz

RSxxx

  • 1 RSxxx interface
  • Operation with RS232 without/with handshake or RS485
  • 5…8 data bits, 1…2 stop bits, parity bit
  • 35 baud…2.3 Mbaud

An interface module can be connected to ADwin-Gold II. The interface modules can be exchanged, but cannot be used at the same time.

Profibus

  • Plug-in interface module
  • 1 fieldbus node: Profibus slave
  • D-Sub socket, 9-pin
  • Data ranges for inputs and outputs configurable up to 61 double words

Profinet-IO

  • Plug-in interface module
  • 1 fieldbus node: Profinet IO slave
  • Connector: Ethernet RJ-45 plug
  • Data ranges for inputs and outputs configurable up to 1280 bytes

EtherCAT

  • Plug-in interface module
  • 1 fieldbus node: EtherCAT slave
  • 2 RJ-45 Ethernet connectors for input and output
  • Data ranges for inputs and outputs configurable up to 254 bytes

Ethernet/IP

  • Plug-in interface module
  • 1 fieldbus node: Ethernet/IP slave
  • 1 Ethernet RJ-45 connector
  • Data ranges for inputs and outputs configurable up to 254 bytes

DeviceNet

  • Plug-in interface module
  • 1 fieldbus node: DeviceNet slave
  • 1 DeviceNet screw terminal, 5-pin

With the bootloader, Gold II can automatically execute a program after being switched on. This allows operation without a PC.

Bootloader

  • Starts up to 10 processes after switching on
  • Operates independently of the PC
  • Can store up to 16,000 values in flash memory

The memory card allows measurement data to be temporarily stored.

Storage-16

  • 16 GB flash memory card for storing measurement data
  • Real-time clock for easy versioning of measurement data
ADwin logo

Jäger Compu­ter­gesteue­rte
Mess­technik GmbH
Rheins­traße 2
D-64653 Lorsch

Contact

E-Mail: info@ADwin.de
Phone: +49 6251 9632-0

About Jaeger Messtechnik – Jobs
Events
Contact / Directions
Impressum – Sitemap